A 100% synthetic high-performance lubricant that offer the best possible performance and protection in the automotive lubricant sector.
It is formulated with the finest and exclusive synthetic bases, exceeding the performance needs of gasoline and diesel engines with or without turbocharger, being especially recommended for competition engines, or for those with severe and intensive use.
1 L · 5 L · 1000 L
0.26 gal (US) · 1.32 gal (US) · 264.17 gal (US)
Fully synthetic lubricant based on very high quality base oils and carefully selected, specially designed to meet the requirements of ACEA A5/B5 specifications and Ford WSS M2C 913-D standard.
It is characterized by its improved lubrication capacity and increased fuel economy (>3%).
1 L · 5 L · 20 L · 200 L · 1000 L
0.26 gal (US) · 1.32 gal (US) · 5.28 gal (US) · 52.83 gal (US) · 264.17 gal (US)
100% synthetic lubricant specially formulated for PSA Blue HDi (DW10F) Euro 6 engines, especially for engines equipped with e-HDI that use Stop & Start technologies. This product also has compatibility with gas treatment systems from all manufacturers, both three-way catalysts (TCW) and particulate filters (DPF) that require an ACEA C2 lubricant with SAE 0W-30.
1L · 5 L · 200 L · 1000 L
0.26 gal (US) · 1.32 gal (US) · 52.83 gal (US) · 264.17 gal (US)
100% synthetic lubricant with mid SAPS technology, recommended for use in gasoline and diesel engines, with or without turbocharging, in passenger cars and delivery vans with long oil change intervals. Due to its reduced SAPS content, this product can be applied in vehicles with modern three-way catalysts and diesel particulate filters.
1 L · 5 L · 20 L · 50 L · 200 L · 1000 L
0.26 gal (US) · 1.32 gal (US) · 5.28 gal (US) · 13.21 gal (US) · 52.83 gal (US) · 264.17 gal (US)
Gasoline and diesel light vehicle engines, including supercharged ones, with direct injection (common rail, pump injector) and with particulate filter.
Specially designed for new BMW, Mercedes-Benz and VAG group engines equipped with particle filters, as well as all those manufacturers that require an ACEA C3 level.
Recommended for all types of service and especially in severe conditions.
5 L · 20 L · 200 L · 1000 L
1.32 gal (US) · 5.28 gal (US) · 52.83 gal (US) · 264.17 gal (US)
Specially formulated to meet the requirements of gasoline and diesel engines that meet the Euro 4 emission reduction standard for almost any VAG group vehicle with long oil change intervals (30,000 km or two years).
Specially designed for small turbocharged gasoline direct injection (TGDI) engines to mitigate the effects of low speed pre-ignition (LSPI).
1 L · 5 L · 20 L · 200 L · 1000 L
0.26 gal (US) · 1.32 gal (US) · 5.28 gal (US) · 52.83 gal (US) · 264.17 gal (US)
100% synthetic low SAPS lubricant specially formulated to exceed the compatibility requirements with the gas treatment systems of all manufacturers (EGR and DPF) where the manufacturer recommends an ACEA C4.
Specially designed for Renault and Nissan group engines equipped with particulate filters that require the RN0720 specification, Mercedes-Benz vehicle engines that require the MB 226.51 specification and, in general, engines of all types of vehicles that require ACEA C4 quality and incorporate particle filters.
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
High-performance 100% synthetic lubricant, which presents the highest exponent in performance and protection in the automotive lubricant sector.
Formulated with special synthetic bases and tri-ester technology, to achieve the highest performance. The end result is a lubricant with incomparable anti-wear properties with maximum efficiency over a wide temperature range.
1 L · 1000 L
0.26 gal (US) · 264.17 gal (US)
100% synthetic fuel economy high performance lubricant specially designed for recent vehicles of the VAG group (Volkswagen, Audi, Skoda, SEAT), equipped with engines complying with Euro 4, 5 and 6 anti-pollution standards and requiring an oil with a low sulphur, phosphorus and sulphated ash content.
It complies with MB 229.52 type approval, certifying that it meets the stringent technical and quality requirements set by Mercedes-Benz to ensure superior engine performance.
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
High-performance 100% synthetic fuel economy lubricant, specially designed for latest generation VAG group engines where the VW 508.00 / 509.00 standard is required. Particularly adapted to the latest high-power gasoline and diesel engines from the VW and Audi brand, equipped with post-catalysts (CAT) and particulate filters (FAP or DPF).
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
High-performance 100% synthetic fuel economy lubricant, specially designed for Ford and for manufacturers that require low friction and HTHS viscosity oils such as Ford, Jaguar, Land Rover,…
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
High-performance 100% synthetic fuel economy lubricant specifically designed for builders requiring a low friction, low HTHS viscosity lubricant and reduced content of sulphated ash, phosphorus and sulphur (mid SAPS).
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
High-performance 100% synthetic fuel economy lubricant specially designed for PSA group vehicles (Peugeot and Citroën) equipped with diesel engines (BlueHDi) with SCR and requiring oils approved with PSA B71 2312.
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
100% synthetic high performance fuel economy lubricant, specially formulated to comply with manufacturers’ regulations that require a very low viscosity HTHS (High Temperature High Shear) lubricant with a reduced content of sulphated ash, phosphorus and sulphur (mid SAPS). Suitable for latest generation gasoline and diesel engines with Euro 4, 5 and 6 regulations, where the use of a lubricant, grade xW-20 and fuel economy is recommended: ACEA C5, ACEA C6, API SP and/or ILSAC GF -6A.
It complies with MB 229.71 type approval, certifying that it meets the stringent technical and quality requirements set by Mercedes-Benz to ensure superior engine performance.
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
100% synthetic fuel economy motor oil specially designed for recent gasoline engines, naturally aspirated or turbocharged, with indirect or direct injection. Designed to use oil with low friction and very low HTHS (High Temperature High Shear) viscosity (≥ 2.6 mPa.s).
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
100% synthetic fuel economy lubricant specially designed for the engines of hybrid vehicles (HEV) as well as rechargeable hybrids (PHEV) equipped with modern gasoline engines, prepared to use very low viscosity SAE 0W-16 and low viscosity HTHS oils.
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
High-performance 100% synthetic fuel economy lubricant, specially designed for latest generation Volvo DRIVE-E gasoline (VEP) and diesel (VED) engines equipped with catalysts and particulate filters (DPF).
5 L · 200 L
1.32 gal (US) · 52.83 gal (US)
questions?
